Tag: linux

Maplins weather station fun

A while ago I bought one of the Maplins weather stations, just for fun really no plans with it. The device came with a pole to which several sensors could be attached: temperature, humitidy, wind speed, wind direction and rain level. The other important bit in the box was the control station, which is a large LCD screen based output… Read more →

Etckeeper – config version control

A valuable tool I have been using for many years is etckeeper, it works by essentially turning your /etc directory into a git repository. This is a fantasticly useful set of tools as any configuration changes can be logged and also reverted quite easily. Install and setup is exeptionally easy too! Packages are available for most distributions, but my scenario… Read more →

SSH known hosts verification failure one liner

WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! Those who regularly build and rebuild machines or virtual machines on a dhcp network will probably be faced with this quite often, this is due to the known fingerprint for the previous host being different to a new one which has aquired the same IP address. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED!… Read more →

Getting Fedora 21 on the Raspberry Pi 2

The recent release of the Raspberry Pi 2 uses a newer version of the ARM architecture spec, the ARM Cortex-A7 uses ARMv7 whereas the previous model ARM11 uses ARMv6. The great thing about this is the majority of Linux distros already provide an Image for this architecture. More importantly, Fedora already have images. There is a slight caveat to the… Read more →

Gluster, CIFS, ZFS – kind of part 2

A while ago I put together a post detailing the installation and configuration of 2 hosts running glusterfs, which was then presented as CIFS based storage. http://jonarcher.info/2014/06/windows-cifs-fileshares-using-glusterfs-ctdb-highly-available-data/ This post gained a bit of interest through the comments and social networks, one of the comments I got was from John Mark Walker suggesting I look at the samba-gluster vfs method instead of… Read more →


Upgrade CentOS 6 to 7 with Upgrade Tools

I decided to try the upgrade process from EL 6 to 7 on the servers I used in my previous blog post “Windows (CIFS) fileshares using GlusterFS and CTDB for Highly available data” Following the instructions here I found the process fairly painless. However there were 1 or two little niggles which caused various issues which I will detail here. The… Read more →

Windows (CIFS) fileshares using GlusterFS and CTDB for Highly available data

This tutorial will walk through the setup and configuration of GlusterFS and CTDB to provide highly available file storage via CIFS. GlusterFS is used to replicate data between multiple servers. CTDB provides highly available CIFS/Samba functionality. Prerequisites: 2 servers (virtual or physical) with RHEL 6 or derivative (CentOS, Scientific Linux). When installing create a partition for root of around 16Gb,… Read more →